Antioch Baptist Church
Sound Room Guide

Enter the password printed on the label by the equipment.

Skip to guide
Antioch Baptist Church · Mamers / Lillington, NC
Sound Room Guide
Step-by-step for Sunday and other services. Updated November 22, 2026.

1. Power on

Turn the amplifiers on last. Arrive about 45-60 minutes before Sunday worship (about 9:50-10:05 for a 10:50 service).

  1. Unlock the sound room. Use the middle dimmer on the three-gang wall plate, labeled Overhead Light, to light the room.
  2. Ignore the unlabeled left toggle on that plate. It has never done anything, and volunteers should leave it alone.
  3. Turn on the main power: the Square D breaker box on the wall behind the computer monitor (one 20 amp breaker). Switch it to ON. This powers all the sound equipment on and around the sound room counter: the computer, amp rack, DVD recorder, DVD/VCR combo, mixing board, mics, and hearing assistance system. It does not power the projectors. A handwritten "Main Power" sign is on the wall in this area. Beside the box is a wall knob labeled Vestibule Speaker - that is a volume knob, not a power switch.
  4. If the Dell computer (black XPS tower to the left of the Acer monitor) is off, press the power button on the top front of the tower and sign in. This is the same PC used for slides, the stream, and Piano Remote. The cable coming out of the front of the Dell is not USB - it is the 3.5 mm headphone jack, going to mixer channel 16, labeled Computer.
  5. If you will use the sanctuary projectors, flip the wall-plate toggle labeled Projector to on (it has handwritten on/off marks). This switch powers both projectors, which are in the sanctuary. Then go to the Projectors section - lower the screen first, before you turn the projectors on.
  6. Turn on the camera and the Toshiba recorder (see Camera).
  7. Last: on the amplifier rack under the counter, find the Furman unit (third from the top). Flip the rocker on its right end, labeled with red tape AMP Power, to on (arrow on the tape). The Delay 1, 2, and 3 lights come on in sequence. This powers the amplifiers. Do not turn AMP Power on until the steps above are done.
Square D breaker box on the wall behind the monitor, switched ON, with a Vestibule Speaker volume knob to the right
Main power: Square D box behind the monitor. It feeds the counter sound equipment, not the projectors. The Vestibule Speaker knob is next to it.
Amplifier rack with a finger on the Furman AMP Power rocker switch at the right end
AMP Power is the taped rocker on the right end of the Furman, third unit from the top.
Lower part of the amplifier rack showing Crown amps, a Peavey UMA, and a Bogen amplifier
Lower rack, top to bottom after the Furman: Crown CL1 (Rear / Choir), Crown XLi 2500, Peavey UMA 12T, Bogen Classic Series.

What's in the amp rack (top to bottom)

  1. Peavey Univerb II (reverb)
  2. Peavey IDL 1000 delay
  3. Furman sequencer - AMP Power rocker on the right
  4. Crown CL1 - channel 1 is Rear, channel 2 is Choir
  5. Crown XLi 2500
  6. Peavey UMA 12T - sits on the Bogen; feeds the JBL speaker above the sound room window
  7. Bogen Classic Series - feeds the single speaker in the combined Sunday school secretary / teller counting room. That speaker is not working as of November 21, 2026.

If something's wrong

  • If the room is dark: use the Overhead Light dimmer on the middle of the three-gang wall plate.
  • If nothing in the booth has power: check that the Square D breaker behind the monitor is ON. That breaker does not feed the projectors - those use the Projector wall switch.
  • If the computer does not start after the breaker is on: press the power button on top of the Dell tower (left of the monitor) and sign in.
  • If the Square D breaker is on but the mixing board is dark: a fuse in the back of the Allen & Heath GL2400 may be blown. This has happened only twice in more than 20 years. A spare fuse is in the plastic storage bins on the counter behind the mixer. If you are not sure how to replace it, call Jeff.
  • If the projectors have no power: check that the wall-plate toggle labeled Projector is on.
  • If there is no sound in the sanctuary: confirm AMP Power is on and the Furman Delay 1-3 lights are green. Then check the mixer main fader and that the mics you need are not muted. If it is still silent, call Jeff. Do not re-patch cables in the rack.
  • If the counting-room speaker is dead: that is already known. Leave the Bogen as it is and mention it to Jeff if needed.

2. Mixer

The board is an Allen & Heath GL2400. Use the tape labels. "Up" means louder or unmuted; "down" means quieter or muted. Mute any mic that is not in use.

Ch Label
1 Podium
2 Pastor
3-4 Choir
5 Piano
6 Keys
7 Green (wireless)
8 Pink (wireless)
9 Black (wireless)
10 Orange (wireless)
14 Baptistry
16 Computer (stereo input from the Dell's front 3.5 mm headphone jack)
17 R1
19 L2
20-21 DVD Player
22 "BUZZ" tag on the fader (historical note only - someone once thought there was a buzz on this channel; no action needed)
23 L3
24 C1
25 R2 (ACOUSTIC tape below)
27 W3
28 C4
29 W1
30 C2

Channels 11-13, 15, 18, and 26 have no labels. Channel 16, Computer, is the 3.5 mm headphone-jack cable from the front of the Dell (not a front USB cable).

Floor-jack codes (R, L, C, W)

R
Floor jack on the right side of the stage
L
Floor jack on the left side of the stage
C
Center / podium floor jack in the middle
W
Wall floor jack near the window

The number after the letter is the jack number, counted left to right inside each floor jack box. Jack 1 is the leftmost (for example, R1 = the leftmost jack in the right-side stage box).

Left side of the Allen and Heath GL2400 mixer with tape labels for podium, pastor, choir, piano, keys, and wireless colors
Left side of the board, including channels 1-10.
Right side of the GL2400 mixer with R, L, C, and W channel labels
Right side, including the R, L, C, and W floor-jack channels.

If something's wrong

  • If one mic is silent: check the battery, the mute button, and that channel's fader. Watch the meter while someone talks into the mic.
  • If you hear a squeal (feedback): mute unused mics, turn down the channel that is ringing, and ease the fader back up to a safe level. Do not keep boosting highs to "fix" it.
  • If the Square D breaker is on but the board is dark: a fuse in the back of the GL2400 may be blown (only twice in more than 20 years). A spare fuse is in the plastic storage bins on the counter behind the mixer. If you are not sure how to replace it, call Jeff.
  • About the "BUZZ" tag on channel 22: that is only a historical note - someone once thought there was a buzz on that channel. No action is needed.
  • Do not re-patch rack wiring or change other people's usual levels a lot without asking Leigh Ann or Pastor Todd. If you make a temporary change, leave a sticky note.

3. Wireless mics

Four color-coded Shure mics sit on the GL2400 as channels 7-10. The receivers are the two Shure BLX88 units on top of the board.

Color Board channel Receiver display (Nov 21)
Green 7 A0
Pink 8 A1
Black 9 A9
Orange 10 A3

There is also a third receiver, a Shure PGX4 (different model, band H6). Do not change group or channel settings on any receiver unless Jeff asks you to.

  1. Confirm each color's receiver shows a signal when that mic is on.
  2. Check batteries. Replace them if the pack looks low or the mic is weak. Spare batteries are in the plastic storage bins on the counter behind the mixer - the room is small, and they are easy to see.
  3. Do a short talk test at speaking distance and watch the mixer meter.
  4. Mute unused mics on the mixer.
  5. Do not leave a wireless mic on and unmuted in a bathroom, nursery, or the parking lot.
Two Shure BLX88 receivers on the mixer labeled Green A0, Orange A3, Pink A1, and Black A9
Receiver displays: Green A0, Orange A3, Pink A1, Black A9. (Pink is A1, per the photo - not the A7 recorded in earlier notes.)

If something's wrong

  • If a wireless mic cuts in and out: put in fresh batteries, keep a line of sight toward the receivers, and confirm the mic is powered on and on the matching color. Swap in another color if you have a spare.
  • If the receiver shows no RF: the mic may be off, on a dead battery, or on the wrong pack. Call Jeff if more than one mic fails.
  • Do not start pressing group or channel buttons to "find a better frequency" during a service.

4. Projectors

There are two Eiki projectors in the sanctuary, front and rear, each with its own remote. The Projector wall switch powers both. Lower the screen first. Press each projector's power button twice. Point the remote at the receiver under the Sanyo TV, not at the projector.

  1. Make sure the wall-plate Projector switch is on (see Power on).
  2. Lower the screen first. The "Screen controls" plate is on the wall above the Square D main power breaker, behind the monitor. Press DOWN. STOP holds it partway; UP raises it.
  3. Turn on each projector by pressing its power button twice. One press is not enough.
  4. Aim the remote at the small black oval IR receiver sitting on the wooden cabinet under the Sanyo TV in the sound room - not at the projector itself.
  5. Use the remote taped Rear Projector (older Eiki CXVP) for the rear projector, and the remote marked FRONT for the front projector.
Wall plate labeled Screen controls with Up, Stop, and Down buttons
Screen controls, on the wall above the Square D breaker behind the monitor: Down lowers the screen, Up raises it, Stop halts it.
Two Eiki remotes, one taped Rear Projector and one marked FRONT
Left: Rear Projector (Eiki CXVP). Right: FRONT.
Small black infrared receiver on the cabinet under the Sanyo TV
Point the remote at this IR eye under the Sanyo TV.

If something's wrong

  • If a projector does not come on: press the power button a second time. Confirm you are pointing at the receiver under the Sanyo TV, and that you are using the Front or Rear remote that matches that projector.
  • If the screen does not move: use the "Screen controls" plate (Up / Stop / Down) on the wall above the Square D breaker behind the monitor, not the three-gang light-and-projector plate.
  • If the projector is on but there is no picture: confirm the computer is awake and PowerPoint is running (see PowerPoint). Give the projector a moment to wake up. Then check the DisplayPort-to-VGA dongle and the video splitter on the back of the Dell - one rear output is DisplayPort, converted to VGA, then split to both projectors. Call Jeff if a different input has to be selected - do not keep stepping through menus if you have not been trained on them.
  • If you just turned a projector off: wait 10 minutes before you flip the Projector wall switch off. Keep this cooldown even though the wall note is old.

5. PowerPoint

Everything in the sound room runs with PowerPoint (song lyrics and other slides). OBS captures what you show for the stream.

  1. On the Dell PC, open the week's Sunday worship deck the way Jeff has it set up. Every Lifted Worship song should already have lyrics in that Sunday deck.
  2. The desktop shortcut Lifted Worship opens a 399-slide reference and backup deck (slide 1 is a song index with the Antioch logo). You do not need it for a normal service.
  3. If a lyric slide is missing during the service, open Lifted Worship from the desktop, pick the song from the index, and display it. This has happened once when lyrics were left out of the Sunday deck.
  4. If the Lifted Worship file asks you to sign in, stop and call Jeff. It is a cloud file, and the desktop shortcut still points at an account that needs to be moved.

Songs on the Lifted Worship index (as of Nov 21, 2026)

  • 10,000 Reasons
  • Always on Time
  • At The Altar
  • Blessed
  • Build My Life
  • Counting my Blessings
  • Firm Foundation
  • Glorious Day
  • Goodbye Yesterday
  • Good Good Father
  • Goodness of God
  • Gratitude
  • Graves into Gardens
  • Holy Forever
  • I Know A Name
  • I Thank God
  • Jesus Messiah
  • Light of the World
  • Look Up Child
  • My Jesus
  • O Come to the Altar
  • Oceans
  • Praise
  • Rest on Us
  • The Blessing
  • The Joy
  • Washed
  • What a Beautiful Name
PowerPoint slide 1 of Lifted Worship, a song index with the Antioch Baptist Church logo
Lifted Worship, slide 1: the song index.

If something's wrong

  • If a lyric slide is missing during the service: open the Lifted Worship desktop shortcut, go to that song from the index on slide 1, and display it. This deck is the backup - it has happened once when lyrics were left out of the Sunday deck.
  • If the wrong song or an old slide is showing: leave the slide show (Esc), go back to the correct deck or to the Lifted Worship index on slide 1, and open the correct song.
  • If slides are frozen: press Esc, reopen the file, or restart PowerPoint. Restart the PC only if that fails and you still have time.
  • If the projectors show the desktop instead of the slides: start the slide show in PowerPoint (Slide Show → From Beginning, or the usual shortcut you were shown).
  • If the file will not open or asks for a password or sign-in: call Jeff. Do not try other people's accounts.

6. Camera and video

The sanctuary camera is a Canon VIXIA HF R30 on the tripod at the sound room window. The picture goes through the Toshiba recorder, then a capture stick, into the Dell PC, and into OBS for the live stream.

Canon VIXIA HF R30 AV OUT (3.5 mm) ↓ RCA composite, rear RCA input on the Toshiba ↓ HD Video Capture stick ↓ Dell XPS 8930 ↓ OBS

The camera's HDMI mini port is unused. The feed is the 3.5 mm 4-pole AV OUT cable, which goes in as RCA composite on the RCA input on the back of the Toshiba. A later upgrade could be mini-HDMI straight from the camera for a sharper picture.

  1. Turn the camera on with the power button on the back, near the top, above the hand strap. A green power light on the front means it is on.
  2. Turn on the Toshiba DVD recorder with the ON/STANDBY button at the front left, top edge (the Toshiba sits on the Symphonic DVD/VHS unit under the monitor).
  3. Confirm the flip-out screen shows the sanctuary. The Sanyo TV hanging over the computer area in the sound room should show the same picture (the DVD recorder / camera output).
  4. Hide the camera's on-screen icons so they do not go out on the TV or the stream: tap the hand-icon touch button at the bottom-right corner of the camcorder's LCD.
  5. Leave the camera framed on the sanctuary unless you have been trained to re-aim it.
Hand pressing the power button on the back of the Canon camcorder, above the strap, with the sanctuary in the background
Camera power is on the back, near the top, above the strap.
Finger pointing to the Toshiba ON/STANDBY button at the front left, with the Symphonic player underneath
Toshiba ON/STANDBY is the front-left button, top edge.
Camcorder LCD showing the sanctuary with on-screen icons, including a hand icon at the bottom right
If you see icons like FUNC., AUTO, and PHOTO, tap the hand icon at the bottom right to hide them.
White HD Video Capture dongle on a blue USB cable, with blue and red lights on
The blue USB 3 cable on the back of the Dell goes to this HD Video Capture stick (HDMI in from the Toshiba).

If something's wrong

  • If the camera screen is dark: press the power button on the back. Check that its power cable is still attached.
  • If the Sanyo TV or OBS has no picture: confirm the camera is on, the Toshiba is on (not just standby), the 3.5 mm camera cable is in the RCA input on the back of the Toshiba, and the capture stick's lights are lit on the blue USB cable behind the PC. The Sanyo TV hangs over the computer area and shows the DVD recorder / camera output.
  • If icons are on the TV or the stream: tap the hand-icon button at the bottom-right of the camera's LCD.
  • If the picture is on the camera but not in OBS: confirm the Toshiba is on and the camera cable is in the RCA input on the back of the Toshiba, then check the capture stick, before you change OBS settings. See also Streaming.

7. OBS and streaming

OBS Studio (version 33.0.1) sends the service to Subsplash. Subsplash then sends it out to Facebook, YouTube, and the ABC Mamers app. After the service, Subsplash's podcast feature automatically pushes the audio to Apple Podcasts and Spotify.

  1. Open OBS Studio on the Dell PC if it is not already open. Use Studio Mode (the Studio Mode button should be on). You will see Preview on the left and Program (what is live) on the right.
  2. Confirm audio: Desktop Audio should stay muted (it shows in red). Audio Input Capture 2 is the mixer feed and should be active, around 0 dB, not slamming into the red.
  3. The scene list is: Wide View, Projector, Slideshow, Zoom Call, PIP Btm Right, and Closeup Center. Preview the scene you want first, then transition it to Program when it is time (Cut, or Fade at 800 ms). Output is 30 frames per second.
  4. When it is time to go live, click Start Streaming. You should see that OBS is streaming. You do not need to open Facebook or YouTube separately - Subsplash handles that distribution.
  5. If you were asked to record as well, click Start Recording.
  6. Do not open OBS stream settings or copy anything from that page. The stream key stays in OBS and in LastPass only.
OBS Studio in Studio Mode, with a Wide View camera preview and the Projector scene on program
Studio Mode: Preview on the left, Program on the right. Audio Input Capture 2 is the board feed.
Sound room desk with Acer monitor, keyboard, Toshiba recorder stacked on a Symphonic DVD/VHS player, and a window into the sanctuary
The desk: Acer monitor, Toshiba on the Symphonic combo, window into the sanctuary.

If something's wrong

  • If you click Start Streaming and it fails or drops: confirm the PC is on the church network (see Network), then try Start Streaming once more. Call Jeff right away if the stream is supposed to be live and it does not recover quickly.
  • If the stream has picture but no sound: check that Audio Input Capture 2 is not muted and is showing level, and that AMP Power and the mixer are up. Desktop Audio should remain muted.
  • If the stream has sound but no picture: go back to Camera (camera, Toshiba, capture stick), then confirm the Program scene in OBS is the one you want (for example Wide View or Projector).
  • If the wrong scene is live: highlight the correct scene in Preview, then transition it to Program.
  • Do not paste or share the stream key. If you ever see it on screen, close that settings window and tell Jeff.

8. Network and internet

The sound room PC gets its network from a Linksys Velop access point on top of the sound room cabinet. Internet enters the church in Becky's office (the secretary office, downstairs in the fellowship hall).

Dell (green cable from the lower card) ↓ Velop on top of the sound room cabinet ↓ Velop in the baptistery changing-room closet ↓ Becky's office - Spectrum modem, wireless router, and 8-port switch

From the switch in Becky's office, the network also reaches other access points, the camera system, the Pastor's computer (his office upstairs in the fellowship hall), and a camera switch in Ray's office (upstairs, across from the Pastor's office). Those offices are in the same building as Becky's.

If something's wrong

  • If there is no internet, or the stream will not connect: first check the Velop light on top of the sound room cabinet. Then check the Velop in the baptistery changing-room / storage closet. Then check the Spectrum modem and wireless router in Becky's office downstairs in the fellowship hall. See also Streaming.
  • If Piano Remote cannot connect: the phone must be on church Wi-Fi (not guest, not cellular), and the Piano Remote window must still be open on the PC. See Piano Remote.

9. Piano Remote

Piano Remote lets Leigh Ann record the piano through the sanctuary system and play it back from her phone, mainly for choir practice - not for Sunday worship playback. It runs on this same Dell XPS 8930. A separate one-page phone guide and QR code for the piano is still to be made.

  1. Power the sound system on as in Power on, including AMP Power. Leave the Piano channel (mixer channel 5) at its usual labeled setting. Volume is meant to be adjusted on the phone, not by changing the board.
  2. Sign into the PC if needed, then open Piano Remote from the desktop (or let it start after sign-in if a Startup shortcut is already there).
  3. Leave the Piano Remote window open on the PC. You may minimize it. Closing it stops the phone remote.
  4. On the phone, join the church Wi-Fi - not cellular data and not a guest network.
  5. Open the Piano Remote page from its QR code or bookmark, unlock it with the PIN (kept in LastPass and on the app, not in this guide), then record or play.
Black Dell XPS tower on the desk to the left of the monitor, with remotes on top
Piano Remote runs on this Dell XPS 8930, on the desk to the left of the monitor.

If something's wrong

  • If the phone cannot connect: confirm it is on church Wi-Fi (not guest, not cellular) and that the Piano Remote window is still open on the PC.
  • If recording or playback is silent: confirm AMP Power is on and the Piano channel is not muted. If it is still silent, tell Jeff - do not start changing other mixer settings.
  • If you forget the PIN: do not guess repeatedly. Ask Jeff. The PIN is not printed here.

10. Shutdown

Do not rush this. Speakers and amplifiers go off before you cut the main breaker. Always shut Windows down first. After you turn the projectors off with the remote, wait 10 minutes before flipping the Projector wall switch off, and raise the screen with UP.

  1. If you are live, click Stop Streaming in OBS. If you were recording, click Stop Recording and wait until it finishes.
  2. Mute unused channels or lower the main fader so nothing pops when the amps go off.
  3. Close PowerPoint.
  4. Shut down Windows (Start → Power → Shut down). Wait until the Dell is fully off.
  5. First for the rack: flip the Furman AMP Power rocker off.
  6. Turn off the Canon camera and the Toshiba recorder (ON/STANDBY).
  7. Turn off each projector with its remote, pointed at the IR receiver under the Sanyo TV. Then wait 10 minutes before you flip the Projector wall switch off. The wall note is old (about 30 years), but keep this 10-minute cooldown.
  8. Raise the projection screen: on the "Screen controls" plate (on the wall above the Square D breaker), press UP. You can do this while the projectors are cooling down.
  9. After the PC is off, AMP Power is off, and the 10-minute projector cooldown is finished (Projector wall switch off), switch the Square D main power breaker behind the monitor to OFF. This is the usual practice after every service, to protect equipment from surges, and it is a main way to protect the mixing board - a fuse in the back of the GL2400 has blown only twice in more than 20 years. This breaker does not control the projectors.
  10. Turn off the Overhead Light, put wireless mics back where they belong (spare batteries are in the plastic storage bins on the counter behind the mixer), and lock the booth if you have the key.

If something's wrong

  • If Windows is still shutting down: wait. Do not flip the breaker off while the PC is still on.
  • If a projector was just turned off: leave the Projector wall switch on until the 10-minute cooldown is finished. Cutting power too early can damage the lamp.
  • If you are in a hurry: still do Stop Streaming, shut down Windows, AMP Power off, raise the screen, then the 10-minute projector cooldown, then the Projector wall switch, then the breaker. Skipping this is how the next team finds problems.
  • If a mic is missing: tell Jeff before you leave.

Antioch Baptist Church, Mamers / Lillington, NC. Sound room guide, updated November 22, 2026. Questions or problems: call Jeff.

Back to the top